.png){kind=icon}
Enable WiFi on your modem
To access your home WiFi network, you need to make sure this function is enabled on your wireless router/modem. If the wireless light on your modem is off, then you need to turn on the wireless radio on your modem.
Depending on the device, you may also need to enable WiFi on your computer.
NOTE: Depending on your model, your modem's user interface may appear slightly different from the images below.
1. Connect a device, such as a computer or tablet, to the internet through your Brightspeed WiFi or using an Ethernet cable connected to your modem.
2. Open a web browser and type http://192.168.0.1 into the web address field.
3. Log in to the modem's settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).
You can find the Admin Username and Password printed on the sticker attached to the side, back or bottom of the modem.
CAUTION! Do not remove or lose your modem sticker, which includes your default admin username and password. These preset credentials cannot be retrieved, and your modem could become unusable without them.
The modem sticker shows you TWO important sets of login credentials. How do you use each one?
SSID and key/wireless password: Used to access and connect to your WiFi network
- SSID is the name that will show up on your devices in the list of wireless networks (may have two for dual-band modem/routers)
- Key/Wireless Password is the password you will enter on your devices to connect securely to your network
- These default settings can also be customized in the modem settings or through the app
Admin username and admin password: Used to log in to your modem settings portal
- Access secure settings such as firmware updates, WiFi security, schedules, and more
- When connected to your home network, go to http://192.168.0.1 to access the portal (also called the GUI)
- These default settings can also be customized in the modem settings
4. Select the Wireless Setup icon in the main menu.
5. Select "Enable" for the wireless radio.
6. Select "Apply" to save your changes.
7. Next, select "SSID Setup" in the left side menu.
8. Select the network (SSID) that you are using.
9. Select "Broadcast SSID".
10. Select "Apply" to save your changes.
11. After the wireless light on your modem turns green, you can connect devices to your WiFi network.
Top tools
Log in to access our most popular tools.
Was this page helpful?
Brightspeed services support
