.png){kind=icon}
How to Set Up C4000 Modem
This article describes how to configure your internet connection using any C4000 router or modem.
For the following models:
Axon C4000BG * C4000LG * C4000XG * Zyxel C4000BZ * C4000LZ
Wrong modem? Visit our tower modem setup page instead.
Have you purchased a new Axon (Greenwave) Axon (Greenwave) C4000 or Zyxel C4000 series modem from Brightspeed and are putting the service together on your own? Before finishing the installation procedure, there are a few things you should be aware of. Before you start, make sure to read the complete instructions below for the best results.
On or before the day your service is supposed to begin, your modem will come in the mail. Search for an email containing information about your order confirmation and a link to follow its status. On your start date, your line must be operational by 7 p.m. If your service has already been activated, you might get a message earlier in the day. At that point, you can begin the installation process. If in doubt, you might wish to put off connecting your modem until after 7 o'clock.
Start by unpacking the box and identifying the modem, cables, and instruction card. If needed, you can download the same instructions below.
What's in the box?
- Modem
- Power cord (black)
- Ethernet cables (yellow and white)
- DSL cable (green) - Does not come with the C4000XG model
We suggest using the Brightspeed Internet app on your iOS or Android device to complete modem setup. The app makes installing your modem a snap, and is also a great way to manage all your Brightspeed services. But, if you don't want the app, no problem — you can use a web browser on your computer to complete installation. Just follow the QuickConnect instructions when you get to step 4.
Next, you'll need to find a good spot for your modem. Where it is placed can have a huge impact on your wireless performance.
- Find a central location in your house, avoiding closets or other closed-off areas to ensure that all devices in your home get a strong wireless signal from the router.
- Choose a spot with good air circulation that doesn't get hot, as excessive heat can cause electronics to perform poorly.
Now it's time to get your modem hooked up.
- Plug the black power cord into a wall outlet and into the power port on the back of the modem.
- For the C4000BG or LG/LZ, plug one end of the green cord into the green DSL port on back of the modem, and the other end into a working phone jack. Note that the C4000XG does not have a DSL port.
DSL and power ports on the back of the C4000BG and LG/LZ models
- Finally, plug one end of the yellow Ethernet cord into one of the Ethernet ports on the modem, and the other end into your computer's Ethernet port.
No Ethernet port? If you are using a tablet or newer laptop, you may not have an Ethernet port on your device. That's okay. If your device doesn't have Ethernet, you can instead connect to WiFi using the login information on the bottom of the modem.
If you see a white cord in your modem kit, it's a second Ethernet cable to be used in case you have additional devices that you would like to plug into the modem.
Do you have both internet and home phone service from Brightspeed?
If NO, proceed to the next step, "Check for connectivity."
If you have the C4000BG or LG/LZ model and you have both landline phone service (not VOIP) and high-speed internet, you will need to install DSL filters on all of your phone cords. These are essential to make sure you get the best phone and internet connection. See the detailed instructions and diagrams below.
Filters are not needed if you use the C4000XG.
Plug the phone cord into a filter and then into the wall jack.
Note: If you have cordless phones, you only need to install a filter on the phone base that plugs in to the wall jack; no filters are needed on the cordless units that only plug into an electrical outlet.
Do not install a filter between the modem and the wall jack.
The DSL cord from the modem to the jack should not have a filter.
As an alternative, use a splitter to plug both a phone and a DSL modem into one wall jack.
Use a DSL splitter to plug a phone and a modem into one wall jack.
Have a home security system? Chat with customer service to get a technician to install a whole-home filter on the line outside your home (there is an installation fee for this.)
Filters are not included in your modem kit. If you have a landline phone and internet with Brightspeed, filters should have been included at the time of your order and will arrive in a separate package. If you did not receive filters, please chat with us.
The single status light ring on the front of the C4000 looks different from older modem models with separate lights for Internet, DSL, Ethernet, WiFi, etc. But the function is basically the same. The status light ring will change colors as it goes through the installation process, to show you its connection status.
While the C4000 initially boots up, it will blink blue while it is looking for the Brightspeed network. It should turn solid BLUE once it has connected.
Troubleshooting tip: If the light blinks blue, check to make sure the green DSL cord is firmly plugged in to both the modem and the wall jack. If it blinks blue again for more than 5 minutes, service is not connected to that jack. Please try another jack or chat with us for further help.
The C4000BG and LG/LZ models also have one or two DSL status lights beneath the ports on the back side, as seen in the photo. These lights will flash red and green while the modem is syncing. The C4000XG does not have a DSL port or light.
- Once the status light ring on the front turns blue, the DSL light(s) should then turn green to indicate the modem is connected and ready to finish setting up.
If the DSL light turns GREEN
This means your modem is connected to our network and the line is active. You can continue to the next step to compete setup.
If the DSL light turns RED
This means the network is not being detected by your modem. This may happen for one of these reasons:
- The Brightspeed network hasn't yet been connected at your address. Some people call on their service start date to say their modem isn't working, when often the issue is simply that the service hasn't been activated. If you're having connectivity issues, try waiting until after 7 p.m. to attempt setup.
- The particular jack you are using isn't hooked up or is faulty. Try plugging the green cord into a different jack.
If the DSL light remains red after checking the cords and trying all available jacks, you will need to chat with a service agent to get help.
If the DSL light is OFF
This indicates nothing is connected to the modem port. Check to make sure the green cord is firmly plugged in to the wall jack and into the DSL port on the modem.
After plugging in your modem, it may take up to 15 minutes for the equipment to install updates and establish a connection with the network.
At this point, you are ready to activate your service! You can proceed using the mobile app or the QuickConnect site on a browser — either one will walk you through the steps to finish installing service.
Option 1: In the Brightspeed Internet app, go into the Install My New Modem section.
Option 2: Open a browser on your computer and go to http://connect.brightspeed.com (not"https"). Follow the steps to complete the installation process using QuickConnect. And don't worry — if your computer is connected to the modem, you will be able to access this site even before your internet service is fully activated.
After completing the setup steps in the app or through the QuickConnect site, check the color of the light ring on the front of the modem to verify its connection status.
If the light ring turns GREEN
Once the light is green, you're connected to the internet and you can get online!
If the light ring turns AMBER
If the light is amber/orange, this means the setup process is not yet complete or you have not yet accepted the user agreement. Use the Brightspeed Internet app or browse to http://connect.brightspeed.com, and follow the prompts to finish setup.
If the light ring turns RED
This means a connection failure has occurred. Try disconnecting everything (DSL and power), waiting a few minutes, and repeating steps 2 through 4. If you still get a red light, you will need to chat with an agent to get further troubleshooting help.
For full instructions on how to read the single status light on the C4000 modem, visit our detailed guide.
Below are some of the most common questions and issues that customers ask as they install a modem.
What if all the lights on the modem are off?
It may sound obvious, but if none of the lights are coming on, it most often means something isn't fully plugged in.
Try this:
- Make sure the power cord is fully and firmly plugged in on both ends: into the power port on the modem and into the wall outlet.
- Make sure the outlet is live. You can test this by plugging in another electrical device, and/or try another outlet.
What if the DSL light is red?
Only the C4000BG and LG/LZ models have a DSL light. The red light indicates the modem isn't connecting to the Brightspeed network. This can be either because the service hasn't been activated yet, you're using an inactive jack, or there's an issue with the modem's authentication process.
Try this:
- Check your order confirmation to make sure you've got the right date that your service is scheduled to start.
- Wait until after 7 p.m. on the service start date to attempt setup.
- Try another phone jack if one is available.
- Try rebooting the modem. Unplug everything, wait a few minutes, and plug in again. This can often resolve a connection issue.
- As a last resort, you can try using the reset button.
How long should the setup process take?
This can depend on a number of factors. The initial boot-up process can take up to 15 minutes as the modem updates firmware and syncs with the network. The remaining setup will depend on your installation method (using the app or the QuickConnect site) and how quickly you go through the steps.
Can I use any jack in my home?
This can depend on the age of your home. In an older home, there may be multiple jacks, and they may have been installed by different providers over the years. It may be that only one of the jacks is hooked up to Brightspeed's network, or all of them may be active.
CAUTION! Do not remove or lose your modem sticker, which includes your default admin username and password. These preset credentials cannot be retrieved, and your modem could become unusable without them.
If you have questions we haven't answered, or if you need any additional support with setting up your modem, chat with us. We're here to help!
Setting up new service? Please note that a phone jack is required to set up Brightspeed internet service in your home. If you don't have a jack, chat with us to have one installed.
Top modem/router topics
- Set up your modem and activate internet
- Connect devices to your WiFi network
- Should you use 2.4 or 5 GHz WiFi?
- Brightspeed compatible modems
- How to read your modem lights
- When and how to use modem reset
- How to return a modem
- How to upgrade your modem's firmware
- Modem or router: What's the difference?
View all Modem/Router topics
Download the Brightspeed Internet app to manage your account.
Top tools
Log in to access our most popular tools.
Was this page helpful?
Brightspeed services support
